Fire Detection & Alarm System
A Heat & smoke detector is a device that senses heat & smoke, typically as an indicator of fire. Commercial Heat & smoke detectors issue a signal to a fire alarm control panel as part of a fire alarm system, while household heat & smoke detectors, also known as Heat & smoke alarms, generally issue an audible or visual alarm from the detector itself or several detectors if there are multiple heat & smoke detectors interlinked.
UL/FM FIRE ALARM CONTROL PANE
Red Analog FACP 2-LOOP AS0820-10
Specifications
- Construction: 16AWG sheet steel
- Dimensions: 14.5â€W x 18.9â€H x 4.25†D
- Weight (without batteries): 20lb
- Mains voltage supply: 115 or 230V AC 50 or 60 Hz.(specify when ordering, default is 115V)
- Mains supply fuse: 1.6A 250V
- Maintenance-Free sealed batteries
- Aux 24V supply: Fused at 500 milliamps
- Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)
- Fault contact rating: 30V DC 1 Amp
- Fire contact rating: 30V DC 1 Amp
- Alarm contact rating: 30V DC 1 Amp
- NAC output rating: 3.1V across both channels, 2.3V across any one
- Detection loop: 250 milliamp output
- Serial expansion port: Serial RS485
- PC port: Serial RS232
- Network connection: Optional network Cards allow the use of e-Net networking or VESnet networking
- NAC Synchronization: Internal Support
- NAC Protocols: System Sensor, Wheelock, Gentex, Amseco
Elite [H] 4 Loop Panel, Red AS1440-10
Specifications
- Primary AC: 120VAC @ 2 Amps 60hz (Optional 240 VAC 50hz)
- Output DC: 24VDC @ 4 Amps
- Power Supply: 5.25 Amp regulated and integrated
- Charger Current: 1.25 Amps max.
- Dimensions: 14.5” W x 24”H x 5” D
- Weight: 25 lbs. (without batteries)
- Color: Red (optional gray)
- Display: 8-line x 40-character LCD (320 characters’ total)
- Zones: 500 Zones per network
- SLC loops: 2 or 4 (class A or B)
- Devices per loop: 126 sensors & modules (800 addresses + sub-addresses max. per panel)
- NAC Outputs: (4) 1.6 Amp @ 24VDC (class B)
- Relay Outputs: (5) Form C 1 Amp @ 30VDC
- Voltage Outputs: (3) 500mA @ 24VDC, reverse polarity supervised
- Power: 500mA @ 24VDC
- Inputs: (3) digital pull downs
Addressable Multi Heat Detector ROR & FT AS2010-00
Specifications
- Operating Voltage: 17-41 VDC
- Standby Current: 350μA
- Alarm Current: 500μA
- Transmission Method: DCP—Digital Communication Protocol
- Maximum Humidity: 95% RH Non-Condensing
- UL Temperature Range: 135º F to 190º F
- Operating Temperature Range: 32º F to 190º F
- Rate of Rise: 15º F/ Min
- Color & Case Material: Bone/ White – ABS Blend
- Weight: 3.2 oz., (4.9 oz. with 4” base)
Addressable Photoelectric Smoke Detector AS2011-00
Specifications
- Operating Voltage: 17-41 VDC
- Standby Current: 450μA
- Alarm Current: 540μA
- Transmission Method: DCP—Digital Communication Protocol
- Maximum Humidity: 95% RH Non-Condensing
- UL Temperature Range: 32º F to 115º F
- Operating Temperature Range: 14º F to 122º F
- Sensitivity Range:7 – 4.0%/ FT @ 300 FPM, 7 – 3.86%/ FT @ 2000 FPM, 7 – 2.65%/ FT @ 4000 FPM
- Air Velocity Range: 0-4000 fpm
- Color & Case Material: Bone/ White – ABS Blend
- Weight: 3.4 oz., (5.1 oz. with 4” base)
Addressable Detector Base AS7001-00
Specifications
- The Dealer shall furnish and install where indicated on the plans, models AS2011 Photoelectric Smoke Sensor, AS2010 Heat Sensor and AS2012 Multi-Criteria Sensors. The selected sensor shall be attached to the AS7001 and permit direct interchange between the listed sensors. The vandal-resistant, security locking feature shall be used in those areas as indicated on the drawing. The locking feature shall be optional and can be implemented when required.
- Note: SLC maximum resistance is 50 ohms.
LPCB Certified Fire Alarm Control Panel
LPCB Fire Alarm Control
Panel
Specifications
- Certified EN54-2:1997 +A1:2006, EN54- 4:1997 + A1:2002 + A2:2006
- LPCB Approved
- Using advance microprocessor technology with Large memory capacity
- Enhance user interface combining LCD Touch screen and keypad access
- Support real time visual algorithm
- Enhance false alarm prevention
CP Conventional Panel 8 Zones - Red - 230 VAC AS1848-11
Specifications
CP Conventional Panel 4 Zones - Red - 230 VAC AS1844-11
Specifications
AW-AFP2189 Addressable Fire Alarm Control Panel
Specifications
- Mains power supply: AC 220V±20%/50Hz or DC24V
- Backup power supply: DC24V maintenance-free battery BAT12V/5AH
- System Operating Environment
- Ambient temperature: -10℃～+55℃
- Ambient humidity: ≤95% (40℃±2℃, no condensation)
AW-AFP2100 Addressable Fire Alarm Control Panel
Specifications
- Each loop card has 2 loops, with 324 addresses as alarm/control points of each loop, the capacity of each loop card is 324*2=648(addresses)
- Each wall mounted AW-AFP2100 panel can be installed maximum 3 loop cards, the maxium capacity is 648*3=1944(addresses). Over 1944 addresses, use the cabinet panel, the cabinet panel can be installed maxium 40 loop cards, the maximum capacity is 648*40=25920(addresses)
- Peer-to-peer with max.20 AW-AFP2100 panels, the maxium system capacity: 25920*20=518400(addresses)
- Maximum simultaneous alarm of each host:
- Fire alarm: 500
- Trouble: 500
- Feedback: 500
AW-CSD501-4W 4 Wire Conventional Smoke Detector
- Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
- The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
- Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.
Specifications
Conventional Photo Electric Smoke - H AS2032-00
Specifications
- Low Profile一1.8″ high (with base)
- 2 wire base compatibility, relay bases available
- Highly stable operation, RF/Transient protection
- Low standby current, 45NA at 24VDC
- Two built-in power/alarm LEDs
- Non-directional smoke chamber
- Vandal resistant security locking feature
- Removable smoke labyrinth for cleaning or replacement
Conventional Heat Sensor 135° F (H) AS2020-00
Specifications
- Low Profile一1.8″ high (with base)
- 2 wire base compatibility, relay bases available
- Highly stable operation, RF/Transient protection
- Low standby current, 45NA at 24VDC
- Two built-in power/alarm LEDs
- Non-directional smoke chamber
- Vandal resistant security locking feature
- Removable smoke labyrinth for cleaning or replacement